KLAXON Mechanical Stability TestER (MST)
TECHNICAL SPECIFICATIONS :
- Maintenance free modern motor
- Inverter speed control
- Replaceable paddle and spindle
- Simple setting
- Easy to use
- 110V or 240V
Operating Instructions
The beaker platform is raised and lowered by means of the large hand wheel. The small hand wheel opposite is the platform lock. The platform should be at maximum height and locked in position during a test.
Place the beaker on the platform sliding the beaker bosses underneath the spring fingers ensuring the beaker is against the rear of the platform.
To start the motor press the "Green Run" button, the motor will run at the displayed figure which is preset to run at 14000 rpm.
There is also a Timer display which is activated by pressing the "Start" button, to stop simply press the "Stop" button when the required test timeframe has been achieved. Please note that the timer counts upwards from zero and has a maximum operating limit of 30 minutes.
To stop the motor press the "Red Stop" button on the control panel.
The test procedure should be carried out in accordance with the relevant BSI/ISO or ASTM test specification.
The new MK4 machine can be configured as a variable speed
version for special custom non standards testing. (This feature must be specified at the time of order).
